Ph Meters

A pH meter consists of three parts: a pH measuring electrode, a reference electrode, and a high input impedance meter. The reference electrode has a known, constant and stable potential.

The pH electrode can be considered as if it were a battery, with a voltage that varies according to the pH of the measured solution. The electrode that measures pH is a glass bulb sensitive to hydrogen ions, with an output in millivolts that varies according to changes in the relative concentration of hydrogen ions inside and outside the bulb. The output of the reference electrode does not change with the activity of the hydrogen ions.

The pH electrode has a very high internal resistance, which makes it difficult to measure the voltage variation with pH. Therefore, the impedance of the pH meter input and leakage resistances are important factors.

Types of pH Meters a Laboratory may need

Industrial pH Controller

A pH meter or pH meter is an instrument used to measure the acidity or alkalinity of a solution. The information provided by this equipment expresses the degree of acidity of an acid or a base in terms of the activity of the hydrogen ions.

The pH is the unit of measurement that describes the degree of acidity or alkalinity and is measured on a scale ranging from 0 to 14. An approximate indication of pH can be obtained using pH indicators or tapes, which change color depending on the variation of the pH level, but these indicators present limitations in terms of accuracy and can be difficult to interpret correctly in dark or colored samples, and this error can be corrected extensively through the use of a pH meter.

Table pH Meters

The pHmeters measure the voltage levels between two electrodes, and show the converted result in a pH value that corresponds to the liquid being analyzed. The operation of a pHmeter is performed through an electrochemical cell mechanism, where the H+ in the chemical reaction allow to determine the concentration of them in solution. When measuring pH with a pH meter, a reference and a measuring electrode are used, which is sensitive to analytes.

A pH meter acts as a high impedance amplifier that accurately determines electrode voltages however minimal they are and displays the results directly in pH units on an analog or digital display. In some cases, the stresses can also be interpreted for special applications or use with selective ion electrodes or oxidation/reduction potential.

PH METERS KALSTEIN

In Kalstein you can find the ideal pH Meters for your Laboratory

There are countless models, so it is normal that you do not know which pH Meters to buy to meet your needs. At Kalstein, we evaluate you to find what you're looking for.
 
 
 
 

   Benchtop pH Meter YR01826

Precision benchtop pH/ion meter, 1 to 5 points calibration, selectable concentration units. The meter is suitable for measuring the pH, ORP and ion concentration...

 
 

Pocket pH Meter – ° C / ° F YR01800 – YR01800-1

High-accuracy pocket pH meter, 1 to 3 points calibration, setup menu contains 5 options. The tester is...

 
 

     YR01822 Benchtop pH Meter

Classical benchtop pH meter, 1 to 3 points calibration, Automatic Temperature Compensation, setup menu contains 5 options, accuracy: 0.01pH...

 
 

YR01825 Benchtop pH / Ion Meter

Professional pH and ion meter, 2 to 5 points calibration, setup menu contains 20 options. The meter is ...

 
 

Our Best Selling pH Meters

Digital pocket pH meter, Manual Temperature Compensation. The tester comes with a plastic body pH electrode for outdoor applications, accuracy: 0.01pH.

Features

• BNC connector is capable of connecting the different types of pH electrodes.
• 1 to 3 points calibration with auto-buffer recognition.
• Manual temperature compensation allows adjusting the temperature value.
• Auto-Read function senses and locks the measurement endpoint.
• Auto-Power Off effectively conserves battery life.
• Setup menu allows setting the pH buffer group, number of calibration points, temperature
unit, etc.
• Reset function automatically resumes all settings back to the factory defaults.

Analysis of the best pH Meters for your Laboratory

What is pH and how is it measured?

pH is the unit of measurement that describes the degree of acidity or alkalinity and is measured on a scale ...

 
 

How does a pH meter work?

A pH meter or pH meter is an instrument used to measure the acidity or alkalinity of a solution. The information provided by this equipment expresses the degree ...

 
 

Importance of pHmeter in a laboratory

A pH meter is one of the most used equipment in a laboratory. It is used to measure the acidity or alkalinity...

 
 

pH meter or pH meter: How should it be used?

A pH meter is an instrument used to measure the acidity or alkalinity of a solution. The information provided...

 
 

Catalog of pH Meters models on offer

KALSTEIN UPDATED

Guides to becoming an expert in pH Meters

At Kalstein we are manufacturers of PH Meters equipment  with the highest quality and the best technology on the market, we leave you some guides so you know more about our product.

PH meter or pH meter: How should it be used?

A pH meter is an instrument used to measure the acidity or alkalinity of a solution. The information provided by this...

What are the steps to use and calibrate a meter?

It is important to follow the instructions and recommendations of manufacturers for the use and calibration of a pH meter...

PH meter, water pH, milk pH, and human body pH

PH is a parameter used to measure the concentration of the hydrogen ion [H +] in a solution. In definition pH, it is the negative...

Use of the PH meter to determine the degree of reduction of a sample

The pH meter is used to determine the degree of decline of a sample. This is important because it indicates the amount of acid or base in the sample and determines the degree of contamination. Likewise, it measures the concentration of H+ ions in a sample....

Frequently Asked Questions about pH Meters

To know the price of pH meters we invite you to send us an email with your request through the contact form..

The delivery time of your Kalstein product will depend on the following:
 
  1. If the equipment of your interest is in stock or if it must be manufactured.
  2. The type of freight you have chosen, this may be; air or sea.
 
Equipment in stock:
 
- Delivery Time (Air): 15-30 days.

 

- Delivery Time (Maritime): 45-60 days.

 

Equipment not in stock:
 
- Delivery Time (Air): 30-60 days.

 

- Delivery Time (Maritime): 60-90 days.
You can make your purchase through:
 
  1. By email: sales@kalstein.eu
  2. By telephone: +33 (0) 1 78 95 87 02
  3. E-commerce: Via Kalstein's official website in your country.
All Kalstein equipment has a 1-year warranty against manufacturing defects. The warranty does not cover damage caused by poor installation or operation by the user, transport defects or by uses other than those specified by the manufacturer. Warranty excludes electrical or consumable parts. For more information visit our “terms and conditions” by clicking HERE
 
At Kalstein, we provide our customers with induction and technical support through new online methods. You can visit our induction videos, technical assistance and guidance provided by a Kalstein team through our YouTube channel (Kalstein English). HERE

Of course, you can request a quote for the Kalstein team of your interest, directly from our official website. Once you have identified your preferred model, click HERE

Send us a direct message and one of our agents will contact you